Man Battlestations Forum

Modeling => The Shipyard => Topic started by: Ruckdog on June 25, 2023, 11:59:22 am

Title: 3d Printed Victory-class Star Destroyer
Post by: Ruckdog on June 25, 2023, 11:59:22 am

I've 3D printed my next project! It's a Victory class Star Destroyer for Star Wars Armada. I'm planning to paint it up in Galactic Republic colors to take advantage of the rapid reinforcements Print&Play material from Atomic Mass Games.

(https://images.dakkadakka.com/gallery/2023/6/25/1169815_sm-.JPEG) (https://www.dakkadakka.com/gallery/1169815-.html)

(https://images.dakkadakka.com/gallery/2023/6/25/1169816_sm-.JPEG) (https://www.dakkadakka.com/gallery/1169816-.html)

(https://images.dakkadakka.com/gallery/2023/6/25/1169817_sm-.JPEG) (https://www.dakkadakka.com/gallery/1169817-.html)

(https://images.dakkadakka.com/gallery/2023/6/25/1169818_sm-.JPEG) (https://www.dakkadakka.com/gallery/1169818-.html)

The STL is from Onil Creations: https://www.etsy.com/listing/1014014910/vsd1-pre-supported

I'm very impressed with the quality of the detail, and the supports were spot-on. It printed cleanly on the first attempt!

Title: Re: 3d Printed Victory-class Star Destroyer
Post by: Kelly on June 27, 2023, 07:27:12 am

Looking good so far, will you be using regular Armada stands or printing new ones?

Title: Re: 3d Printed Victory-class Star Destroyer
Post by: Ruckdog on June 28, 2023, 10:36:42 pm

I actually did print a base, more as a proof of concept than anything else. I will probably be able to use an extra official base from my collection, but I wanted to see how a printed one would do. The print is done, but I still need to prep and paint it.

Title: Re: 3d Printed Victory-class Star Destroyer
Post by: Easy E on July 05, 2023, 04:59:23 pm

Nice!  Way better than my humble printer could do.